Nissan Develops Pineapple-Leaf Composite Body Panel for Motorsport

Nissan develops pineapple leaf composite body panel for motorsport

Nissan Nismo Race Car With Pineapple-Leaf Body Panels

By SAPER News Desk

Published 2026-11-17 05:41

4 Minute Read
Views

Nissan is turning one of agriculture’s commonly discarded materials into a potential source of automotive body panels. In collaboration with Okinawan materials company Food Reborn Co. Ltd., the automaker has developed a natural fiber-reinforced plastic using fibers extracted from pineapple leaves.

The project is currently an exhibition technology rather than a confirmed production-car program. Nissan says the composite is intended for demanding environments such as motorsport, where sustainable natural-fiber composites for modified exterior body panels are typically scarce and costly.

From pineapple waste to a molded body panel

Pineapple farming produces a large amount of leaf waste after the fruit is harvested. Nissan says more than 50 million tons of pineapple leaves are discarded globally every year. Those leaves are a byproduct that is normally unutilized, allowing the partnership to investigate an agricultural waste stream rather than a material intended for food production.

The manufacturing process involves several stages. Fibers are first extracted from the leaves and spun into flat yarn. That yarn is then woven into fabric, which becomes the reinforcing layer in the composite before the material is molded into a body-panel shape.

The result belongs to the same broad category as other fiber-reinforced plastics. The pineapple-leaf fibers provide reinforcement while resin forms the surrounding matrix. Nissan says the material offers higher tensile strength than conventional natural-fiber composites based on flax, although it has not published the numerical test results needed for an independent comparison.

Why natural-fiber composites are attracting attention

Natural fibers such as flax, hemp and jute have been investigated for automotive applications because they can provide reinforcement at relatively low density. They are not intended to replace carbon fiber in every high-load application, but natural-fiber composites can be considered for selected components, including modified exterior panels and motorsport bodywork.

Tensile strength is only one part of automotive suitability. Before approving a material for wider vehicle use, manufacturers must also assess factors such as impact behavior, moisture exposure, heat resistance, dimensional stability, fatigue performance and repairability. Nissan has not released enough data to establish how its pineapple-based composite compares with other materials across those measures.

The partnership’s relevance extends beyond passenger-car production. Nissan says some racing categories require or encourage sustainable natural-fiber-reinforced plastics for modified body panels, while supply of suitable composites has historically been limited and expensive. A material based on an agricultural byproduct could offer another option for those specialist applications if it can meet the necessary performance and production requirements.

Nissan is licensing the process rather than keeping it in-house

Under the agreement, Nissan is licensing its natural fiber-reinforced-plastic expertise to Food Reborn. The license covers production of the flat yarn, woven fabric and resin-impregnated prepreg used to make the composite.

That arrangement is significant because developing a promising material and establishing a repeatable supply chain are separate challenges. Food Reborn specializes in biodegradable materials and pineapple-leaf fibers, while Nissan contributes materials knowledge and experience with vehicle applications. Combining those capabilities could help the companies develop the material for specialist use if it passes further testing.

A report from TorqueCafe identifies the demonstration part as a bonnet for the R35-generation Nissan GT-R. Nissan’s announcement, however, does not provide a full production specification or confirm that the panel is destined for customer vehicles. The current panel should therefore be treated as a technology demonstrator rather than evidence of an imminent road-car program.

The sustainability case still needs to be measured

Using agricultural waste is not automatically the same as delivering a lower-impact vehicle component. The overall environmental result depends on how the leaves are collected, dried and transported; how much energy is required to separate and process the fibers; what resin is used; and what happens to the finished panel at the end of its service life.

Nissan has not released a lifecycle assessment or a quantified carbon-footprint comparison for the pineapple composite. Without that information, it is not possible to determine whether the material offers a decisive advantage over flax composites, recycled plastics or other established alternatives. The use of a waste stream is encouraging, but the complete supply chain matters more than the origin of the reinforcement alone.

There are also practical questions surrounding durability. Exterior body panels must withstand environmental exposure and the demands of their intended use. A racing panel may operate under different conditions from a road-car component, and motorsport applications can accept different compromises in cost, service life and repairability. Nissan’s claim that the material is suitable for demanding environments will therefore require broader published testing before its production potential can be judged.

A small demonstration with wider implications

Nissan and Food Reborn plan to display the pineapple-leaf panel at the SAMPE Japan Advanced Materials Technology Exhibition in Tokyo from November 18 through 20, 2026. The exhibition will give materials specialists an opportunity to examine the demonstration technology and discuss possible applications.

The project forms part of Nissan’s broader Green Program 2030, but it should be viewed as one component of a larger materials strategy rather than a standalone solution to automotive emissions. Lightweight composites can reduce material use and, in some applications, vehicle mass. Yet their environmental benefits depend on manufacturing, durability and end-of-life processing being considered together.

For now, the pineapple panel’s importance lies in the way it connects waste reduction with performance engineering. If Nissan and Food Reborn can demonstrate consistent quality, competitive cost and a favorable lifecycle profile, discarded leaves could become a useful feedstock for limited-production bodywork and motorsport components. The next step is not simply proving that pineapple fibers can be molded into a bonnet; it is proving that they can do so reliably and with a measurable environmental advantage.

Sources: Motor1.com; TorqueCafe.

Keep Reading

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *